Epson PictureMate Start Here Manual page 4

4
Plug In and Turn
On PictureMate
1
Connect the power cable
to the power adapter.
2
Plug the small cable into
the back of PictureMate.
3
Plug the other end of
the power cable into a
standard power outlet.
4
Press the
turn on PictureMate.
PictureMate gets the cartridge ready for printing.
After a few minutes, you see a message that
PictureMate is ready.
5
Press the OK button.
You see this message on the
photo viewer screen:
6
Do one of the
following:
• If you want to start printing
right away, press the Back button.
Then go to section 5.
• If you want to select your personal settings, press
the OK button and follow the steps below.
After you press OK, you see
the first wizard message:
7
Press the
list of layout settings:
8
Press the
want to use most often. Then press the OK button.
9
Press the OK button again to move to the Color
Effects setting.
Repeat steps 7 and 8 to select the color, date stamp,
time stamp, and print mode settings you want to use
most of the time.
On button to
button. You see a
or button to highlight the layout you
On button