Installing Software And Connecting Picturemate - Epson PictureMate Using Manual

Installing Software and Connecting PictureMate

To connect PictureMate
If you don't have a USB cable, you can buy one from your local computer
dealer or from Epson.
When you're ready to start, see the section for your computer system:
For Windows,
For Macintosh,
Installing PictureMate for Windows
First make sure PictureMate is NOT CONNECTED to your computer,
and REMOVE your memory card, if it's inserted. Then:
1. Load a sheet of PictureMate
Photo Paper, glossy side up,
against the right edge of the
paper feeder. Slide the edge guide
against the paper and open the
output tray.
2. Press the
on PictureMate.
3. Turn on your computer.
®
Deluxe Viewer Edition, you'll need this cable:
®
See the inside back cover for details.
®
see below.
®
see page 9.
button to turn
On
Type A to B
USB cable
On button
1