Installing Software And Connecting Picturemate - Epson PictureMate Using Manual

Installing Software and Connecting PictureMate

To connect PictureMate
If you don't have a USB cable, you can buy one from your local computer
dealer or from Epson.
When you're ready to start, see the section for your computer system:
■
For Windows,
■
For Macintosh,
Installing PictureMate for Windows
First make sure PictureMate is NOT CONNECTED to your computer,
and REMOVE your memory card, if it's inserted. Then:
1. Press the P
2. Turn on your computer.
3. Wait a minute for your computer to start up, then insert the
PictureMate CD in your CD-ROM or DVD drive.
Note:
If you have any problems installing the PictureMate software, see
page 16.
®
you'll need this cable:
®
See the inside back cover for details.
®
see below.
®
see page 9.
button to turn on PictureMate.
On
Type A to B
USB cable
1