Epson PictureMate Using Manual page 11

Installing PictureMate for Macintosh
1. If you inserted a memory card, remove it from PictureMate.
2. Connect the square end of your USB cable to the
of PictureMate. Then connect the flat end of the USB cable to any open
USB port on your Macintosh.
Make sure the handle is
all the way down in back
3. Press the P
4. Turn on your Macintosh and wait a minute for it to start up.
5. Insert the PictureMate CD in your CD-ROM or DVD drive.
button to turn on PictureMate.
On
USB
9
port on the back