Settings - Shark IZ300UK Series Instructions Manual

CHARGING THE BATTERY
USING THE LI-ION CHARGER
LI-ION CHARGER
Plug the Li-Ion Charger into a wall outlet�
IN THE VACUUM: FLEXOLOGY®
To put the vacuum in storage mode, press the
FLEXOLOGY® Wand Unlock Latch while folding
the handheld vacuum forward until the wand clicks
and locks� Plug the charger into the charging port
on the handheld vacuum�
8
s h a r kc l e a n . c o . u k
IN HANDHELD VACUUM
To charge simply plug the charger into the charging
port while still attached to the wand�
OUT OF THE VACUUM
The battery is removable, press and hold the
Battery Release Button, then slide out the battery�
Plug the charger into the charging port on the
battery� To reinstall the battery, slide it into the slot
in the back of the handheld vacuum�
POWER ON/OFF
Press power button to turn on or off the vacuum�
CARPET SETTING
To vacuum in carpet mode, press the floor select
button until the carpet icon ( ) illuminates� The
brushrolls will spin faster to help pick up dust
below the surface of your carpets�

SETTINGS

HARD FLOOR SETTING
To vacuum in hard floor mode, press the floor select
button until the hard floor icon ( ) illuminates� The
brushrolls will spin slowly to clean bare floors and
small area rugs�
Suction Speeds
Off
Standard
SUCTION MODES
Press the ( ) button to toggle between ECO,
Standard and Boost modes� To save battery power,
select ECO mode� For everyday cleaning, select
Standard� For extra power, select Boost mode�
s h a r kc l e a n . c o . u k
ECO
Boost
9