Advertisement
Quick Links
Scarborough Six Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
dowel
long
bolt
locking
x20
x42
screw x8
nut x42
I
J
K
slide
cover
bracket
x6
rail x6
x6
Q
R
S
bolt
screw
small bolt
x4
x8
x16
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
D
E
F
screw
slide
x78
rail x6
L
M
N
plug
screw
adjuster
x6
x24
x1
T
U
A1
felt pad
wedge
screw
x8
x4
x8
Hardware Supplied
Phillips & Flathead screwdrivers
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
G
H
slide
slide
rail x6
rail x6
O
P
allen
leg bracket
key x1
x4
V
W
X
safety
screw
wall
x2
strap x2
anchor
x2
Wall Strap
Y
Z
wall
washer
x4
screw
x2
1
Advertisement
Related Manuals for Mocka Scarborough Six Drawer
Summary of Contents for Mocka Scarborough Six Drawer
- Page 1 Phillips & Flathead screwdrivers For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 Attach 3x slide rails (F) to panel [3] as shown with 9x screws (E). Insert 6x bolts (C) into panel [1] and tighten with a screwdriver. Tighten with a screwdriver. Insert 4x bolts (C) into panel [3] and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 Tighten with a screwdriver. Insert 4x bolts (C) into panel [4] and with 18x screws (E). Tighten with a screwdriver. Insert 4x bolts (C) tighten with a screwdriver. into panel [5] and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Attach panels [4] and [5] to panels [6] with 4x dowels (A) and secure Tighten with a screwdriver. Place 6x covers (K) over the brackets with 4x locking nuts (D). Tighten with a screwdriver. (J) as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Attach panel [7] to panel [4] secure with 2x locking nuts (D). Attach panel [7] to panel [5] secure with 2x long screws (B). Tighten Tighten with a screwdriver. with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 Attach panel [3] to panels [6] and [7] with 2x dowels (A) and with 2x locking nuts (D). Tighten with a screwdriver. secure with 4x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 Attach panel [1] to panels [3], [4] and [5] with 6x dowels (A) and secure panels [3] and [4] as shown. with 6x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 Attach panel [2] to panels [3], [4] and [5] with 6x dowels (A) and panels [3] and [4] as shown. secure with 6x long screws (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 9 Allen key (O). Attach 4x felt pads (T) to the ends of the legs. Attach 1x support leg [10] to panel [2] as shown. screw the height adjusters (N) onto the support leg [10]. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 10 Drawer x 6 Attach panels [13], [14] and [15] as shown using 24x screws (M). Slide panels [16] down along the grooves between panels [13] Tighten with a screwdriver. and [14]. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 11 Attach slide rails (H) and slide rails (I) to the underside of the side panels 24x locking nuts (D). Tighten with a screwdriver. as shown. Secure with 24x screws (E) and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 12 (K) until it catches on the plug (L). with 8x screws (A1). Now attach 2x safety straps (V) to the back edge of panel [1] using 2x washers (Z) and 2x screws (W). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 13 (V). Fasten to the wall using 2x washers (Z), 2x wall anchors (X) and 2x wall screws (Y). Ensure unit is balanced and steady before use. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Scarborough Six Drawer and is the answer not in the manual?
Questions and answers