User-Defined Characters - Epson LQ-510 User Manual

Commands Arranged by Topic

User-defined Characters

See Chapter 4 for sample programs and full information on this
topic.
ESC &
Format:
ASCII code:
Decimal:
H e x a d e c i m a l : 1 B
Comments:
This command allows characters to be redefined in the currently
selected mode.
When defining characters, DIP switch 2-5 must be set to off.
ESC :
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
This sequence copies the characters in ROM to RAM so that
specific characters can be redefined. The variable n represents
the font family. Fonts in font cartridges (except Orator and
Orator-S) can also be copied. The LQ-510 cannot select fonts
2 to 6 if you do not have the multi-font cartridge.
0: Roman
1: Sans Serif
2: Courier
3: Prestige
9-36
Command Summary
ESC &
27 38
26 00
ESC :
27 58
1B 3A
4: Script
5: OCR-B
6: OCR-A
Define User-defined Characters
0 n1 n2
0 n1 n2
n1 n2
0 n
0 n
00
n
d 2 d a t a
d1
d2 d a t a
d1
d 2 d a t a
d1
Copy ROM to RAM
0
0
00