Selecting A Font - Epson LQ-510 User Manual

Selecting a Font

This table shows the family numbers and characters per inch of the
fonts in the Multi-Font Module.
Font name
Courier
Prestige
Script
OCR-B
OCR-A
Orator
Orator-S
There are two ways to select a font from the module:
With the printer turned off, dial the family number of the font
l
with the rotary switch on the module. When the printer is
turned on, that font becomes the default font if the slot is
selected with the DIP switch setting or by pressing the button
the control panel.
on
Send a software command, ESC k, to the printer to select the
l
family number. See the Command Summary in Chapter 9 for
details.
Proportional spacing is
module.
Numbers 0, 1, and 9 are not used.
Family number
2
3
4
5
6
7
8
effective when printing any font in this
not
Using
The Multi-Font Module
Characters per inch
10, 12, 15
10, 12, 15
10, 12, 15
10
10
10
10
the Printer Options 5-33