Epson LQ-510 User Manual page 61

Printing on Special Paper
3. Select the paper thickness you want according to the table
below. For normal use, the lever should always be set to
position 2 on the scale.
Paper Type
Paper (single sheets or continuous)
Thin paper
24 lb paper
Multi-part forms
2-sheet
3-sheet
Labels
Envelopes
Air mail
Plain
Bond (20 lb)
Bond (24 lb)
Note: Lever position 1 is used only when the printed characters
are too light. Setting the lever to position 1 when you are using
thin paper may damage the print head.
If the lever is set to position 4 or higher, the printing speed
•
may be reduced slightly.
Paper Handling
2-22
Lever Position
2
2
3
3
4
4
4 or 5
6
6
7