Manual Recording - Thinkware XW10 User Manual

2-5. Manual Recording

In addition to recording accidents, the dash cam allows the user to initiate manual recording mode to cap-
ture scenery and/or places while driving. This feature can also be used to save video as witness where the
installed vehicle is not directly involved in an accident. Video files saved during manual recording mode are
stored in a separate location on the memory card and will be protected from video overwriting in continuous
recording mode.
 Briefly press the REC
device will record video for 1 minute (10 seconds before and
50 seconds after) as of the time when the button is pressed.
The recorded video will be saved under the "manual_rec"
folder.
Note that when manual recording is initiated, the previous
10 seconds prior to pressing the button will be saved so
even if you just missed a scene, you can still capture and
safely store the video by initiating manual record within
10 seconds of the event.
Cautions
When the allocated storage for manual recording videos is full, oldest video file will be replaced by the
new recorded video.
14
button to start recording. The