Maintaining Your Water System; Changing The Filter - Kinetico Premier Series Owner's Manual

Maintaining Your Water System

Your Kinetico water system is engineered to provide you with quality water
without requiring extensive maintenance. However, some routine maintenance
is necessary to keep your system working properly.

Changing the Filter

Your Kinetico system may be equipped with an in-line filter to remove solid
material from the inlet water supply. Periodically, the filter cartridge will
require replacement. This should occur when the water pressure in the home
begins to gradually decrease. The frequency of the filter change is determined
by the amount of water used and the solid material content of your water
supply.
Procedure
1. Turn off the feed water to the filter by turning the by-pass valve
PASS position*.
2. Slowly turn the handle on the pressure relief valve
position**. Allow at least one minute for system to depressurize and to
minimize spillage.
Open
2
Closed
On
10
5
Off
3
1
1
to the BY-
to the OPEN
2
4
6