Marantz SR7013 Owner's Manual page 295

Contents Connections
The menu screen is not displayed on the TV
The menu screen or status information screen is not displayed on the TV.
The menu screen is only displayed on this unit and a TV connected with an HDMI cable. If this unit is connected to a TV using a different video output
0
connector, operate while watching the display on this unit.
The status information will not appear on the TV when the following video signals are being played.
0
- Some images of 3D video content
- Computer resolution images (example: VGA)
- Video with an aspect ratio other than 16:9 or 4:3
- Some kind of HDR signals
When a 2D video is converted to a 3D video on the TV, the menu screen or status information screen is not displayed properly. (v p. 269)
0
In the pure direct playback mode, the menu screen or status information is not displayed. Switch to a sound mode other than the pure direct mode.
0
(v p. 146)
Set the "TV Format" setting in the menu to a selection that is appropriate for the TV. (v p. 212)
0
The color of the menu screen and operations content displayed on the television is
different from normal
The color of the menu screen and operations content displayed on the television is different.
Performing operations on this unit during playback of a Dolby Vision signal may cause variance in the color display of the menu screen and operations
0
content. This is a characteristic of the Dolby Vision signal and is not a malfunction.
Front panel Display
Playback Settings
295
Rear panel
Tips
Remote Index
Appendix