Marantz SR7013 Owner's Manual page 204

Contents Connections
o Power Saving
If "TV Speaker" is set as the audio output setting of your TV, this unit is
automatically set to standby mode to reduce power consumption.
This function is activated in the following cases.
When "TV Audio" is selected as the input source of this unit
0
When playing content from a device connected by HDMI
0
On:
Off
(Default):
0 "Power Saving" can be set when "HDMI Control" is set to "On". (v p. 202)
Front panel Display
Playback
Use Power Saving function.
Do not use Power Saving function.
Rear panel
Settings
o Smart Menu
This function can be used to configure the settings of this unit, select
an input source and set Tuner and Internet Radio stations using the TV
remote control.
On:
Off:
0 "Smart Menu" can be set when "HDMI Control" is set to "On". (v p. 202)
NOTE
0 If the "Smart Menu" settings have been changed, always reset the power to
connected devices after the change.
0 The Smart Menu function may not work properly depending on the
specifications of your TV. In this case, set "Smart Menu" to "Off".
204
Remote
Tips Appendix
Use Smart Menu function.
Do not use Smart Menu function.
Index