Marantz SR7013 Owner's Manual page 186

Contents Connections
o Loudness Management
This sets whether to output as specified in "Dynamic Compression" or
output directly without compressing the dynamic range of audio
recorded in the disc.
On
(Default):
Off:
0 "Loudness Management" can be set when Dolby Digital, Dolby Digital Plus,
Dolby TrueHD and Dolby Atmos signal is input.
Front panel Display
Playback
Outputs are given based on enabling the
settings made in "Dynamic Compression"
and Dialogue normalization function.
"Dynamic Compression" settings and
Dialogue normalization are disabled, and
the signals on the disc are output as is.
Rear panel
Settings
o Dynamic Compression
Compress dynamic range (difference between loud and soft sounds).
Auto:
Low / Medium / High:
Off:
0 "Dynamic Compression" can be set when Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, Dolby Atmos or DTS signal is input.
0 The default setting is "Off". When the input signal is the Dolby TrueHD or
Dolby Atmos source, the default setting is "Auto".
0 "Auto" cannot be set when inputting a DTS signal.
186
Remote
Tips Appendix
Automatic dynamic range compression
on/off control according to source.
These set the compression level.
Dynamic range compression is always
off.
Index