Marantz SR7013 Owner's Manual page 187

Contents Connections
o Dialog Control
Adjust the volume of dialog in movies, vocals in music, etc. so these
can be heard more easily.
0 – 6 (Default : 0)
0 This can be set when a DTS:X signal that is compatible with the Dialog Control
function is input.
o Low Frequency Effects
Adjust the low frequency effects level (LFE).
n When "Input Mode" is set other than to "7.1CH IN"
-10 dB – 0 dB (Default: 0 dB)
n When "Input Mode" is set to "7.1CH IN"
0 dB / +5 dB / +10 dB / +15 dB (Default: +10 dB)
0 For proper playback of the different sources, we recommend setting to the
values below.
0 Dolby Digital sources: 0 dB
0 DTS movie sources: 0 dB
0 DTS music sources: -10 dB
Front panel Display
Playback Settings
o Center Spread
Center Spread expands the center channel signal to left and right front
speakers to create a wider frontal audio image for the listener. It is
optimized and designed primary for playback of stereo music content.
On:
Off
(Default):
0 You can set this when sound mode is "Dolby Surround".
o DTS Neural:X
DTS Neural:X Expands the non-object based audio signals and
optimizes them for your speaker configuration.
On
(Default):
Off:
0 You can set this when sound mode is "DTS:X" or "DTS:X MSTR".
187
Rear panel
Tips
Use "Center Spread".
Do not use "Center Spread".
Use "DTS Neural:X".
Do not use "DTS Neural:X".
Remote Index
Appendix