Completely Blank Pages Are Output - Epson EPL-N3000 Reference Manual

Completely blank pages are output

Cause
The printer may have loaded
more than one sheet at a time.
There may be no toner left in
the imaging cartridge.
The problem may be with your
application or interface cable.
The Paper Size setting may be
incorrect.
MP Tray Size setting may be
incorrect.
The yellow tape may not be
pulled out of the imaging
cartridge.
The MP tray cover is not
attached correctly.
What to do
Remove the paper stack and fan it. Tap
it on a flat surface to even the edges.
Then reload the paper.
If the message on the LCD panel or in
the EPSON Status Monitor 3 indicates
that the amount of toner is low, see
"Replacing the imaging cartridge" on
page 224.
Print out a status sheet. See "Printing a
Status Sheet" on page 260. If a blank
page is ejected, the problem may be
with the printer. Turn off the printer
and contact your dealer.
Make sure the correct paper size is set
in the Tray Menu on the control panel.
When loading paper for which the size
is not specified with Auto setting,
specify the correct paper size on the MP
Tray Size setting in the Tray Menu on
the control panel.
Make sure that the yellow tape has been
pulled out completely. See "Replacing
the imaging cartridge" on page 224 for
details.
Make sure that the MP tray cover is
closed securely. Next, remove the
imaging cartridge and confirm that
there is no paper remaining in the
printer, then reinstall the imaging
cartridge.
Troubleshooting
9
9
9
9
9
9
9
9
9
9
9
9
269