Because the printer weighs approximately 20.9 kg (46.1 lb)
without the imaging cartridge installed, one person should
not lift or carry it. Two people should carry the printer, lifting
it by the correct positions as shown below.
Unless specifically instructed in this guide, be careful not to
touch the fuser, which is marked CAUTION HOT SURFACE,
or the surrounding areas. If the printer has been in use, the
fuser and the surrounding areas may be very hot. If you must
touch one of these areas, wait 40 minutes to allow the heat to
subside before doing so.
Unless specifically instructed in this guide, do not insert your
hand into the her, as it may be very hot.
Technical Specifications
A
A
A
A
A
A
A
A
A
A
A
A
335