Epson EPL-N3000 Reference Manual page 171
Epson epl-n3000: reference guide
Hide thumbs
Also See for EPL-N3000:
- Service manual (477 pages) ,
- Setup manual (8 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
8. Click Add. Your printer's IP address is automatically added
as a printer name to the Printer List.
9. Select your printer's IP address from the list, and then select
Show Info from the Printers menu. The Printer Info dialog box
appears.
10. Select Installable Options from the pop-up list, and make the
necessary settings.
11. Click Apply Changes, and then close the Printer Info dialog
box.
12. Quit Print Center.
USB
Follow these steps to select the printer when it is connected using
the USB interface:
Note:
Make sure to specify PS3 as the printer mode on the printer's control
panel for proper printing results.
Make sure to select the printer by using the procedure described
below. The Plug and Play function automatically selects the printer
when the printer is connected via the USB interface. However, this
automated selection may not work properly.
1. Make sure that the printer is properly connected to your
computer with an USB cable, and that the printer is turned on.
158
Using the PostScript Printer Software (Macintosh)
Advertisement
Table of Contents
