Parallel Interface - Epson EPL-N7000 Network Manual

T. Margin
Text
Auto CR
Auto LF
Alt. Graphic
Bit Image
Zero Char
Character Set
Set button
Refresh button
Interface

Parallel Interface

Items
Parallel I/F
Speed
Use this option to specify the distance from
the top of the sheet to the baseline of the first
printable line.
Use this option to set the page length in lines.
Use the automatic carriage return option to
perform a carriage-return line-feed (CR-LF)
operation whenever the print position
exceeds the right margin.
When you set AutoLF to Off, the printer does
not send an automatic line feed (LF)
command with each carriage return (CR).
When on, the printer adds a line feed to
each carriage return it receives.
Turns the Alternate Graphics option on or off.
With Bit Image set to Dark or Light, your
printer can correctly emulate the graphics
densities set with the printer command.
When you select Dark, the bit image density
is high. When you select Light, the bit image
density is low.
Select whether the printer prints a slashed
zero or an unslashed zero.
Select character table.
Saves any changes.
Clears any changes and reloads the
previous settings.
Explanations
Allows you to activate or deactivate the
parallel interface.
Select the transfer speed.
Network Software
3
3
3
3
3
3
3
3
3
3
3
3
163