Epson EPL-N7000 Network Manual page 112

3. Create a controlled access printer.
In NetWare Administrator, select the Directory context icon.
Select Create from the Object menu, and then select NDPS
Printer. Type the Printer Agent name, and then select Create
a new Printer Agent, and then click Create. Select the NDPS
Manager you have created, and then select EpsonNet NDPS
Gateway Configuration for the Gateway Type. Click OK.
Note on using the Adobe PostScript 3 Kit:
When you create two Printer Agents for the same printer, be sure
to use names related to the printer driver type so you can tell which
Printer Agent is associated with the PostScript or the ESC/Page
printer driver.
4. Select one of the following port handler type. Select Remote
(LPR on IP) if you want to use the printer in IP network. Select
Remote (rprinter on IPX) if you want to use the printer on an
IPX network. Select Queue Based if you want to keep the
NetWare NDS print server configuration of the network
interface. Then click Next.
Note on using the Adobe PostScript 3 Kit:
If you have selected Remote (rprinter on IPX) for the first Printer
Agent, be sure to select Remote (LPR on IP) for the second Printer
Agent.
5. Configure it as described below. It is a good idea to print a
network status sheet of the network interface and configure
the corresponding items.
112
How To