Epson EPL-N7000 Network Manual page 111

❏ If the NetWare server is bound with only IPX protocol, only one
IPX Printer Agent is created. In this case, you cannot create another
IPX Printer Agent manually. To avoid this, be sure to bind both the
IP and IPX protocols to the NetWare server first.
Creating a Printer Agent manually
You can create Printer Agents, either public access printers or
controlled access printers. The way to create a Printer Agent
differs depending on the printer type you choose.
Note on using the Adobe PostScript 3 Kit:
If you want to use a printer as a PostScript and ESC/Page printer and
want to install the printer driver automatically to the client computer,
you must create two Printer Agents: one for the PostScript printer driver
and the other for the ESC/Page printer driver. If you create one with
Remote (rprinter on IPX), create the other with Remote (LPR on IP).
You can create two LPR Printer Agents but cannot create two IPX
Printer Agents for the same printer.
1. Select a printer type (either public access printer or controlled
access printer).
2. Create a public access printer. If you want to create a
controlled access printer, go to step 3.
In NetWare Administrator, double-click the NDPS Manager
you have created. Click Printer Agent List, and then click
New. Type the Printer Agent name, and then select EpsonNet
NDPS Gateway Configuration for the Gateway Type. Click
OK. Then go to step 4.
Note on using the Adobe PostScript 3 Kit:
When you create two Printer Agents for the same printer, be sure
to use names related to the printer driver type so you can tell which
Printer Agent is associated with the PostScript or the ESC/Page
printer driver.
111
How To
2
2
2
2
2
2
2
2
2
2
2
2