Safety Decals - Woods BATWING BW2400X Operator's Manual

SAFETY & INSTRUCTIONAL DECALS
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
1 - SERIAL NUMBER PLATE
PN 1006348 (located on split rim wheels)
WARNING
RELEASE ALL AIR PRESSURE BEFORE LOOSENING BOLTS.
FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH.
MAX. SPEED: 20 MPH, MAX. WEIGHT: 4000 LBS., MAX. AIR PRESSURE: 40 PSI.
BE CAREFUL!
Use a clean, damp cloth to clean safety decals.
Avoid spraying too close to decals when using a
pressure washer; high-pressure water can enter
through very small scratches or under edges of
decals causing them to peel or come off.
Replacement safety decals can be ordered free
from your Woods dealer. To locate your nearest
dealer, check the Dealer Locator at
www.WoodsEquipment.com, or in the United States
and Canada call 1-800-319-6637.
MAN0764 (11/5/2008)
Replace Immediately If Damaged!
EXPLOSION
HAZARD
2 - FRONT AMBER REFLECTOR
(PN 1002940)
3 - REAR RED REFLECTOR
(PN 57123)
4 - PN 18869
DANGER
SHIELD MISSING
DO NOT OPERATE - PUT SHIELD ON
17 - PN 1004114
DANG NGER ER
If shaft connection is visible, shield
is missing. Replace shield before
operating equipment.
(Safety Decals continued on next page)
Safety 11
1004114