Safety Decals - Woods DS12.50 Operator's Manual

Rotary cutter
Table of Contents

Advertisement

SAFETY & INSTRUCTIONAL DECALS
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
1 - SERIAL NUMBER PLATE
2 - PN 5669
3 - PN 12777
BE CAREFUL!
Use a clean, damp cloth to clean safety decals.
Avoid spraying too close to decals when using a pressure washer; high-pressure water can
enter through very small scratches or under edges of decals causing them to peel or come off.
Replacement safety decals can be ordered free from your Woods dealer. To locate your
nearest dealer, check the Dealer Locator at www.WoodsEquipment.com, or in the United
States and Canada call 1-800-319-6637.
MAN0571 (Rev. 6/15//2007)
Replace Immediately If Damaged!
4 - PN 1003751
WARNING
CRUSHING AND PINCHING HAZARD
Be extremely careful handling various parts of
the machine. They are heavy and hands, fingers,
feet, and other body parts could be crushed or
pinched between tractor and implement.
Operate tractor controls from tractor seat only.
Do not stand between tractor and implement
when tractor is in gear.
Make sure parking brake is engaged before
going between tractor and implement.
Stand clear of machine while in operation or
when it is being raised or lowered.
FAILURE TO FOLLOW THESE
INSTRUCTIONS COULD RESULT IN
SERIOUS INJURY OR DEATH.
(Safety Decals continued on next page)
Safety 11
1003751-A

Advertisement

Table of Contents
loading

Table of Contents