Woods BATWING BW2400X Operator's Manual page 42

Install Chain or Belt Shielding
 Full chain or rubber shielding must be installed
when operating in populated areas or other areas
where thrown objects could injure people or dam-
age property.
• If this machine is not equipped with full chain
or rubber shielding, operation must be stopped
when anyone comes within 300 feet (92 m).
• This shielding is designed to reduce the risk
of thrown objects. The mower deck and protec-
tive devices cannot prevent all objects from
1. Front center chain plate
2. Front right chain plate
3. Front left chain plate
4. Rear chain plates
8. Pin, 22-24 chain
11. 5/16 Chain, 7-link
16. 3/8 NC x 1 Carriage bolt
17. 3/8 NC Flange lock nut
18. Rear chain plate, center
42 Assembly
ANGER
Figure 35. Chain Shielding Installation - Center Section
escaping the blade enclosure in every mowing
condition. It is possible for objects to ricochet
and escape, traveling as much as 300 feet (92 m).
Install chain and rubber shields with hardware as
shown. (Refer to Figure 35 and Figure 36 for Chain
Shielding Installation; Figure 37 and Figure 38 for Belt
Shielding Installation.)
NOTE: CHAIN SHIELDING - Center Section: Attach
rear chain plates (4) to the top of center section. Attach
center chain plate (18) to the bottom of the center sec-
tion. Wing: Install four (two per wing) 6-link chain sec-
tions (12) and four (two per wing) 4-link chain sections
(13) to the wing skid shoes. Secure with carriage bolts
(14) and flange lock nuts (15). See Figure 36.
MAN0764 (11/5/2008)