Using The Ecp Mode - Epson EPL-5700 Reference Manual
Epson epl-5700:
Hide thumbs
Also See for EPL-5700:
- Reference manual (221 pages) ,
- Service manual (128 pages) ,
- Setup manual (33 pages)
Table of Contents
Advertisement
+5V
Pull up to +5V with 1 k
Using the ECP mode
To use the ECP mode with a parallel (IEEE 1284-B compliant)
connector, your computer must support the ECP mode.
Note:
The ECP mode is available with Windows 98/95 and Windows NT4.0.
To use the ECP mode, follow these steps:
1. Make the ECP mode settings in the BIOS setting program that
comes with your computer. (For details of the settings and the
program, see your computer manual.)
2. Click the Start button, point to Settings, and then click
Control Panel.
3. Right-click the System icon, and click Open in the menu that
appears.
4. Select the Device Manager tab.
5. Select the ECP Printer Port under Ports [COM & LPT], then
click the Properties button.
6. Select the Resources tab.
7. Make the appropriate setting in the Resource settings dialog
box. (This setting depends on your computer system. For
details, see your computer manual.)
8. Click OK to save the settings.
A-12
Technical Specifications
Advertisement
Table of Contents
