Table of Contents
Advertisement
SUPERSERVER 2028TP-DC1R/DC1TR/DC1FR USER'S MANUAL
1-2
Serverboard Features
At the heart of the SuperServer 2028TP-DC1R/DC1TR/DC1FR lies the
X10DRT-P/PT/PIBF, a dual processor serverboard based on the Intel®
PCH C612 chipset and designed to provide maximum performance. Two of these
serverboards can be mounted in the SC217HD+-R1K28B chassis.
The sections below cover the main features of the X10DRT-P/PT/PIBF serverboard
(see Figure 1-1 for a block diagram of the chipset).
Processors
The X10DRT-P/PT/PIBF supports single or dual Intel® Xeon® E5-2600 v3 series
processors (Socket R LGA 2011). Please refer to the serverboard description pages
on our website for a complete listing of supported processors (www.supermicro.
com).
Memory
The X10DRT-P/PT/PIBF has sixteen DIMM slots supporting up to 1024 GB
of LRDIMM (Load Reduced DIMM) or 512 GB of RDIMM (Registered DIMM)
DDR4-2133/1866/1600 MHz registered ECC memory. See Chapter 5 for details.
Note: Check the Supermicro website (www.supermicro.com) for the latest memory
support information.
SAS
An LSI 3108 controller is included in the system to support eight SAS3 hard drives
per node. (RAID 0, 1, 5, 6, 10, 50 and 60 supported). The SAS drives are hot-
swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SAS drives.
SATA
A Serial ATA controller is integrated into the PCH C612 to provide up to four SATA3
(6 Gb/s) hard drives per node (RAID 0, 1, 5 and 10 supported). The SATA drives
are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SATA drives.
1-2
Advertisement
Table of Contents
