Table of Contents
Advertisement
The drives are mounted in drive carriers to simplify their installation and removal
from the chassis (Figure 6-15). These carriers also help promote proper airflow for
the drive bays.
Drive Tray
Installing a Drive into the Hard Drive Tray
1. Remove the screws (2) holding connecting the drive tray the carrier (Figure
6-16).
2. Remove the tray from the carrier.
Figure 6-16. Removing Dummy Drive from Tray
Caution: Except for short periods of time while swapping hard drives, do not operate
the server with the hard drives empty.
Figure 6-15. Chassis Drive Tray
1
1
6-17
Chapter 6: Advanced Chassis Setup
Dummy Drive
1
1
Advertisement
Table of Contents
