Table of Contents
Advertisement
Connecting to the Computer
Your printer comes with two standard interface connectors,
parallel and USB.
Note:
If you want to connect the printer to your computer through an installed
optional interface card, you need a different type of cable. See the optional
interface card's manual.
Using a parallel connection
Follow the steps below to connect the printer to your computer
through the parallel interface. You need a shielded, twisted-pair
parallel interface cable that is IEEE-1284 compatible.
1. Make sure that both the printer and the computer are turned
off.
2. Attach the parallel interface cable to the printer, and secure
the connector with wire retaining clips as shown.
3. Plug the other end of the cable into the computer's parallel
interface connector.
24
Connecting the Printer
Advertisement
Table of Contents
