Table of Contents
Advertisement
Printer location
The printer should be located so that the exhaust gases and heat
generated are:
Not blown directly into the user's face
Vented directly out of the building whenever possible
For United Kingdom Users
The EPSON AcuLaser C1000 is a page printer which utilizes a
semiconductor laser.
There is no possibility of danger from the laser, provided that the
printer is operated according to the instructions in the guides
provided.
Since radiation emitted by the laser is completely confined within
protective housings and external covers, the laser beam cannot
escape from the machine during any phase of user operation.
w
Warning:
The use of controls, or the performance of procedures and
adjustments other than those specified in this guide may result in
hazardous radiation exposure.
This is a semiconductor laser. The maximum power of the laser diode
is 15 mW and the wavelength is 775 to 795 nm.
Use of options
EPSON (UK) Limited shall not be liable against any damages or
problems arising from the use of any options or consumable products
other than those designated as Original EPSON Products or EPSON
Approved Products by EPSON (UK) Limited.
6
Safety Instructions
Advertisement
Table of Contents
