Epson AcuLaser C1000 Setup Manual page 22

4. Push the DIMM into the slot straight, until the clip comes up
to hold the memory module securely in place.
c
5. Replace the cover.
To confirm that the memory module is installed correctly, print a
status sheet. If the total amount of memory listed does not include
the size of the optional memory module, try reinstalling. Make
sure that the module is securely attached to the DIMM slot. For
instructions on how to print a status sheet, see "Testing the
printer" on page 31.
18
Installing the Options
Caution:
Do not remove any modules from the circuit board except the
S0 or S1 slot. Doing so may cause the printer to malfunction.