Epson AcuLaser C1000 Setup Manual page 9

CDRH regulations
For information about the Center for Devices and Radiological
Health of the U.S. Food and Drug Administration, see the Reference
Guide.
Ozone safety
Ozone emission
Ozone gas is generated by laser printers as a by-product of the
printing process. Ozone is produced only when the printer is
printing.
Ozone exposure limit
The recommended exposure limit for ozone is 0.1 parts per million
(ppm) expressed as an average time-weighted concentration over an
eight (8) hour period.
The EPSON AcuLaser C1000 laser printer generates less than 0.1 ppm
for 8 hours of continuous printing.
Minimize the risk
To minimize the risk of exposure to ozone, you should avoid the
following conditions:
Use of multiple laser printers in a confined area (see above)
Operation in conditions of extremely low humidity
Poor room ventilation
Long, continuous printing together with any of the above
Safety Instructions
5