Table of Contents
Advertisement
4.
Device controls & settings
4.1 Connecting the different parts
EN
1.
Remove the different parts from the box.
Place the treatment unit on a flat surface. If you have more than one
2.
treatment unit, connect them together.
Take the female connector and slot it into the left side of the treatment
3.
unit. Then take the male connector and connect it to the right side (see
illustration).
Female
Select the belt for the part of the body you are treating, and lay it on a flat
4.
surface with the side with the Silk'n logo facing you.
Next, fold each side of the belt inwards so that you see the black Velcro pads.
5.
Velcro
pad
10
Male
Velcro
pad
Advertisement
Table of Contents
