Cub Cadet 19A70054100 Operator's Manual page 7

Before beginning installation, remove all parts from the carton to make sure everything is present. Carton contents are listed below
and shown in Fig. 3-3. The hardware pack included in this kit is detailed at the end of this section.
• Boot Assembly - 631-05103
• Grass Bag Assembly (2) - 664-05104
• Vertical Bagger Support - 683-04519C
• Grass Bag Support - 683-05329A
• Chute Adapter - 731-10133
• End Plugs (4) - 735-0246A
• Bagger Cover - 631-05474B
• Bagger Vent Wall Assembly - 631-05491B
• Bagger Cover Left Side Wall - 731-12350B
• Hose Assembly - 819-010699
50/54" Double Bagger 19A70055100
Figure 3-3
• Hinge Pin - 711-06701
• Adapter Bracket - 819-010661
• Hitch Adapter Bracket - 789-02137
• RZT Bagger Weight - 719-04217A
• Weight Plates (3) - 789-02137
• Weight Hanger Bracket Left - 789-02197
• Weight Hanger Bracket Right - 789-021978
• Hardware Pack - 689-01419
• Anti-marking Adhesive Strips - 777X52246
S
ection
3 — c c
ontentS of arton
7