Install Ink Cartridges - Epson WorkForce 500 Start Here Manual

4

Install ink cartridges

Note:
Don't load paper before installing the ink cartridges.
1
Lift up the scanner.
2
Open the cartridge cover.
3
Shake the ink cartridges,
then unpack them.
4
Remove only the yellow tape from each cartridge.
Caution:
5
Insert the cartridges in the
holder for each color.
6
Press the cartridges down until they click.
7
Close the ink cartridge cover and press it
down until it clicks.
8
Close the scanner.
9
Press the OK button to charge ink. Charging takes about 2 minutes.
Caution:
initializing or you'll waste ink.
Don't remove any other seals from the cartridges.
Don't turn off the WorkForce 500 Series while the ink system is