Solving Problems; Any Questions - Epson WorkForce 1100 Start Here Manual

Solving problems

The printer makes noise after ink cartridge installation.
•
The fi rst time you install ink cartridges, the printer must charge its print head
for 2.5 minutes or so. Wait until charging fi nishes (the
fl ashing) before you turn off the printer, or it may charge improperly and use
excess ink the next time you turn it on.
• If the printer stops moving or making noise, but the
fl ashing after 5 minutes, turn off the printer. If the light is still fl ashing when you
turn it back on, contact Epson as described in "Any questions?".
•
Turn off the printer, then make sure the ink cartridges are inserted completely
and the ink cartridge cover is closed completely. Wait a moment, then turn the
printer back on to clear the error.
You're having problems installing the printer software.
•
During software installation, you are prompted to connect a USB cable. When
you connect the cable, make sure your printer is turned on and the cable is
securely connected at both ends.
• Close your other programs, including any screen savers and virus protection
software, and install the software again.

Any questions?

On-screen Epson Information Center
Click the desktop shortcut for easy access to the WorkForce 1100 Series user's
guide, FAQs, online troubleshooting advice, and software downloads. You can
also purchase paper and ink.
Online help with your software
Select Help or ? when you're using your software.
Technical Support
Internet Support
Visit Epson's support website at epson.com/support and select your
product for solutions to common problems. You can download drivers and
documentation, get FAQs and troubleshooting advice, or e-mail Epson with
your questions.
Speak to a Support Representative
Call (562) 276-7202 (U.S.), 6
and 7 to 4
AM PM
Time, Monday through Friday. Days and hours of support are subject to change
without notice. Toll or long distance charges may apply.
to 8
AM
, Saturday, or (905) 709-2567 (Canada), 6
, Pacifi c Time, Monday through Friday
PM
power light stops
power light is still
to 6 , Pacifi c
AM PM