England's Stove Works 50-SNC30 Installation & Operation Manual page 45

Hide thumbs Also See for 50-SNC30:
Table of Contents

Advertisement

Available languages

Available languages

AC-16 Blower Installation Instruction Guide – for Models with "30" in Model
Guía de instrucciones de instalación del ventilador AC-16
INSTRUCTIONS DE FONCTIONNEMENT : Cet appareil est prévu pour l'installation d'un moteur de soufflante en option à 2 vitesses. La vitesse
de la soufflante doit être réglée sur « Bas » quand le poêle fonctionne avec une combustion lente, et sur « Haut » quand le feu est vif. Pour le
cheminement du cordon d'alimentation, veillez à ce que celui-ci n'entre en contact avec aucune surface chaude.
For our freestanding models with "30" in
model number
Para nuestros modelos de pie con "30" en el
número de modelo
Pour nos modèles sur pieds avec un numéro de
modèle "30"
The optional heat circulation blower on this stove requires periodic lubrication; this lubrication should be performed no less than
every three months of normal operation. To properly lubricate the blower, use an eye dropper or similar dispensing device to drip
El soplador de circulación de calor opcional en esta estufa requiere la lubricación periódica; esta lubricación no debería ser
realizada menos que cada tres meses de la operación normal. Para lubricar correctamente al soplador, use un cuentagotas o el
dispositivo de distribución similar para gotear 5-7 gotitas de SAE 20 petróleo en el puerto del aceite en el lado del motor de
Le ventilateur en option de circulation de chaleur sur ce poêle nécessite un graissage périodique; cette lubrification doit être
effectuée au moins tous les trois mois de fonctionnement normal. Pour lubrifier correctement le ventilateur, utilisez un compte-
gouttes ou un dispositif semblable de distribution pour faire couler 5 à 7 gouttes d'huile SAE 20 dans l'orifice à cet effet, situé sur
Number
Guide d'installation du ventilateur AC-16
Install AC-16 Blower here,
using the (4) supplied
mounting screws
5-7 droplets of SAE 20 oil into the oil port on the side of the blower motor.
le côté du moteur du ventilateur.
ALWAYS FOLLOW ALL CODES AND OWNER'S MANUALS!
¡SIEMPRE SIGA TODOS LOS CÓDIGOS Y MANUALES DEL PROPIETARIO!
TOUJOURS SUIVRE TOUS LES CODES ET LES MODES D'EMPLOI!
Install AC-16 Optional Blower as shown, using the (4)
supplied mounting screws.
Instale el ventilador opcional AC-16 como se muestra,
usando los tornillos de montaje suministrados (4).
Installer le ventilateur optionnel AC-16 comme indiqué,
à l'aide des (4) vis de fixation fournies.
soplador.
11
120 VOLTS, 60Hz, 0.75 AMPS, 2900 RPM
DANGER: RISK OF ELECTRIC SHOCK.
DISCONNECT POWER BEFORE SERVICING
UNIT.
120 VOLTS, 60Hz, 0,75 AMPÈRE, 2900
TR/MIN
DANGER : RISQUE DE CHOC ÉLECTRIQUE.
DÉBRANCHER L'ALIMENTATION AVANT
TOUTE INTERVENTION SUR L'APPAREIL.
OPERATING INSTRUCTIONS:
This
unit
is
set
installation of an optional 2-speed
blower motor.
The fan speed
should be run on "Low" when the
unit is operating at lower burn
settings, and set to "High" for high
burns.
When routing the power
cord, be sure that the cord does
not come into contact with any hot
surface.
up
for

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents