Setting Operation - WESTECH SeaStar SS1024 Instruction Manual

Setting Operation

4.4
Sealed Setting indicator
Gel
Setting indicator
Flooded
Setting Indicator
·Load Work Mode Setting
When the controller is powered on, press the setting button to control the load output.
Press the button once, the ON/OFF status will be changed corresponding.
·Battery Type Setting
Press the setting button for more than 5 seconds, the original battery type indicator will be
flashing. Then press the setting button to choose Sealed, Gel, and Flooded battery type.
The setting is finished till the digital tube stop flashing.
Battery type selection
Sealed lead acid battery
Flooded battery
Figure 4-3 Setting operation indicating
Battery type
Gel battery
Load Status LED indicator
LED indicator
Sealed
Flooded
15
Setting button
Table4-5
Gel