Replacing Ink Cartridges - Epson Stylus CX9400 Quick Manual

after the "replace cartridge" indicator comes on. The printer ships with full cartridges
and part of the ink from the first cartridges is used for charging the printer.
For best printing results, use up a cartridge within six months of opening the package.
Store ink cartridges in a cool, dark place. If you bring them inside from out in the cold,
allow them to warm up to room temperature for at least 3 hours before using them.

Replacing Ink Cartridges

Make sure you have a new ink cartridge before you begin. You must install new
cartridges immediately after removing the old ones.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
Leave the expended cartridge(s) installed until you have obtained a replacement, or the
ink remaining in the print head nozzles may dry out.
1. Turn on the CX9400Fax Series.
If a cartridge is low or expended, you see a message
on the display screen. Note which cartridges need to
be replaced and press
If you're replacing a cartridge before you see a
message on the display screen, press the
button, select
select
Change Ink Cartridge
2. Open the scanner, then open the cartridge cover.
.
OK
, and press
Maintenance
and press
Setup
. Then
OK
.
OK
Replacing Ink Cartridges
33