Epson Stylus CX9300 Start Manual

Start Here
1.
Note:

Unpacking

Do not open the ink cartridge package until you are ready to install it in the printer.
The cartridge is vacuum packed to maintain its reliability.
Ink Cartridges Power Cord
2.
Removing Protective Tape
Remove all tape
4.
Setting Up LCD Panel Display
Select Press
Press Select
Select
Copyright © 2007 Seiko Epson Corporation. All rights reserved.
Printed in XXXXXX XX.XX-XX XXX
Phone Cable CD-ROM Start Here Basic Operation Guide
3.
Turning On
Connect
Plug in
Select Press
Press
Type
Select
Type
5.
Installing Ink Cartridges
Shake
Install
6.
Ink Charging
Turn on
Press
Note:
The ink cartridges first installed in your printer will be partly used to charge the print head.
These cartridges print fewer pages compared to subsequent ink cartridges.
Select
8.
Installing the Software
Do not connect the USB cable until
you are instructed to do so.
If this screen appears,
click Cancel.
Press
When this screen appears, connect to your PC.
Open Unpack
Press (Click) Close (Click)
7.
Wait about
2.5 min
For Windows
For Mac OS X
Insert
Double-click
o For Windows. No installation screen? & Double-click the CD-ROM icon.
Follow the
instructions.
Only remove the yellow tape.
Close
Connecting to a
Phone Line.
Follow the
instructions.
Click
Installation complete.
Turn over