Table Of Contents - GEA HG22e Series Assembly Instructions Manual

Contents
1 Safety
1.1 Identification of safety instructions
1.2 Qualifications required of personnel
1.3 General safety instructions
1.4 Intended use
2 Product description
2.1 Short description
2.2 Name plate
2.3 Type key
3 Areas of application
3.1 Refrigerants
3.2 Oil charge
3.3 Limits of application
4 Compressor assembly
4.1 Setting up
4.2 Pipe connections
4.3 Pipes
4.4 Laying suction and pressure lines
4.5 Operating the shut-off valves
4.6 Operating mode of the lockable service connections
5 Electrical connection
5.1 Information for contactor and motor contactor selection
5.2 Connection of the driving motor
5.3 Circuit diagram for direct start 230 V ∆ / 400 V Y
5.4 Start unloader
5.5 Electronic trigger unit MP 10
5.6 Connection of the electronic trigger unit MP 10
5.7 Functional test of the electronic trigger unit MP 10
6 Commissioning
6.1 Preparations for start-up
6.2 Pressure strength test
6.3 Leak test
6.4 Evacuation
6.5 Refrigerant charge
6.6 Start-up
6.7 Avoiding slugging
6.8 Connection of oil level regulator
7 Maintenance
7.1 Preparation
7.2 Work to be carried out
7.3 Spare parts recommendation
7.4 Accessories
7.5 Extract from the lubricants table
7.6 Decommissioning
8 Technical data
9 Dimensions and connections
10 Declaration of conformity and installation
11 Service
Page
4
6
8
10
D
13
GB
F
E
18
20
22
23
24
25
3