Starting And Stopping The Engine - Takeuchi TB108 Operator's Manual

OPERATION

Starting and Stopping the Engine

Before Starting the Engine
1. Adjust the seat for a comfortable operating
position.
2. Fasten your seatbelt.
3. Check that the safety lock lever is in the
locked position.
4. Check that all the levers and pedals are
in the neutral position.
PREHEAT
5. Insert the key into the starter switch, turn
it to the ON position, then perform the
following inspection:
B5B003
B5D002
OFF
ON
START
E4D002
2
1
¡ The battery charge warning lamp (1)
and engine oil pressure warning lamp
(2) light, and the meters also start
functioning.
If a lamp does not light, the bulb may be burnt
out or a wire may be damaged. Contact a
Takeuchi sales or service outlet for repairs.
53
HOURS
1/10
°C
B5D0032