Si061062
5. Removal of PCB from Main Electrical Box
Procedure
Step
1. Remove the shield plate.
1
Pull out the clamp.
2
Unfasten the 8 hooks
and remove the shield
plate.
2. Remove the PCBs.
Unfasten the 2 hooks
1
of the sensor PCB.
2
Disconnect the
connector [S49] and
remove the sensor
PCB.
Removal Procedure
Warning
Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Hook
Removal of PCB from Main Electrical Box
(R12459)
Hook
Shield plate
Hook
(R12759)
Sensor
PCB
(R12456)
[S49]
(R12457)
Points
[S49]: control PCB
11