Procedure To Remove Pcb And Electrical Component Box - Daikin RXMQ4PVE Service Manual

Si341211
2. Procedure to Remove PCB and Electrical
Component Box
Procedure
Step
1 Remove the 2 fixing
screws (M5) of terminal
block mounting plate.
2 Remove the fixing
screw (M5) above the
electrical component.
3 Release the hook of the
resin stay from the
terminal block mounting
plate.
Removal Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure

Procedure to Remove PCB and Electrical Component Box

Points
Preliminary preparation
Remove the top, front and
side panels according to the
"Procedure to Remove
Outside Panels".
5