Advertisement
Contents
Connections
DC OUT jacks
When a device with DC IN jack is connected, the connected device's power on/standby can be controlled through linked operation to this unit.
The DC OUT jack outputs a maximum 12 V DC/150 mA electrical signal.
NOTE
0 Use a monaural mini-plug cable for connecting the DC OUT jacks. Do not use a stereo mini-plug cable.
0 If the permissible trigger input level for the connected device is larger than 12 V DC/150 mA, or has shorted, the DC OUT jack cannot be used. In this case, turn off the power
to the unit, and disconnect it.
Front panel
Display
Playback
Settings
12 V DC/150 mA trigger-compatible device
96
Rear panel
Tips
Remote
Index
Appendix
Advertisement
