Advertisement
Contents
Connections
Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey
®
Setup.
If you enable new speakers in the speaker configuration menu after
0
performing Audyssey
®
Setup, you will no longer be able to select
Audyssey MultEQ
®
XT32, Audyssey Dynamic EQ
Dynamic Volume
®
. (v p. 186)
Changing the following settings:
0
Speaker size (Large or Small) / Distances / Levels / Crossovers settings
will not disable Audyssey
®
or require running Audyssey
"Manual Setup" can be used without changing the settings. Please set if
0
necessary.
Amp Assign
You can change the Pre Amplifier assignment according to your speaker
system.
o Assign Mode
Select how to use the Pre Amplifier.
You need to configure the detailed settings for the speaker
configuration in accordance with the selected mode. Select Assign
Mode configure the corresponding detailed settings.
Front panel
Display
Playback
Settings
13.1ch
(Default):
®
or Audyssey
®
Setup again.
11.1ch (Bi-Amp):
11.1ch + Front B:
222
Rear panel
Tips
All Pre Amplifiers of this unit are used
0
for MAIN ZONE.
You can connect speakers for up to
0
15.1-channels for MAIN ZONE.
The pre-out output automatically
switches for playing back up to 13.1-
channels in accordance with the input
signal and sound mode when 15.1-
channel speakers are installed.
The Pre Amplifier of this unit is
0
assigned to 2-channels for creating bi-
amp connections with the front
speaker.
You can connect speakers for up to
0
11.1-channels for MAIN ZONE.
The Pre Amplifier of this unit is
0
assigned to 2-channels for connecting
to the second front speaker.
You can switch between the desired
0
combination of front speakers A and
front speakers B.
Switch the front speaker using the "Front
Speaker" setting. (v p. 240)
Remote
Index
Appendix
Advertisement
