Advertisement
Contents
Connections
o Pre-out for Bi-Amp / Pre-out for Front B
When "Assign Mode" is set to "11.1ch (Bi-Amp)" or "11.1ch + Front B"
in the menu, select the PRE OUT connectors used for bi-amp or
second pair front speakers.
HEIGHT 2 ：
HEIGHT 3
(Default) ：
SURROUND BACK:
Front panel
Display
Playback
The assigned channels are output from
the HEIGHT2 PRE OUT connectors. Up
to one pair of height, ceiling, and Dolby
Atmos Enabled channels can be used.
The assigned channels are output from
HEIGHT3 PREOUT connectors. Up to
two pairs of height, ceiling, and Dolby
Atmos Enabled channels can be used.
The front wide channel cannot be used.
The assigned channels are output from
the SURROUND BACK PRE OUT
connectors. The surround back channel
cannot be used.
Rear panel
Settings
o Floor
n Layout
Select the floor speakers location.
5ch & SB & FW:
5ch & SB
(Default):
5ch & FW:
5ch:
223
Remote
Tips
Appendix
This layout combines a surround back or
front wide speaker with the basic 5-
channel layout.
This layout combines a surround back
speaker with the basic 5-channel layout.
This layout combines a front wide
speaker with the basic 5-channel layout.
This is a basic 5-channel layout that uses
front speakers, center speakers and
surround speakers.
Index
Advertisement
