Advertisement
Contents
Connections
Resetting network settings
If network contents cannot be played or the unit cannot connect to the network, restarting the unit may improve the problem. We recommend restarting the
unit before returning the settings to the default settings. (v p. 281)
If the operations are not improved by restarting the unit, follow the steps below.
Network settings are reset to the factory default values. Make settings again.
However, the menu "Amp Assign", "Speaker Config." and "Video" settings are not reset.
X
INPUT SELECTOR
Front panel
Display
Playback
ENTER
BACK
302
Rear panel
Settings
1
Press X to turn on power to the unit.
2
Turn INPUT SELECTOR to select "HEOS Music".
3
Press and hold the main unit's BACK and ENTER at the
same time for at least 3 seconds.
4
Remove your fingers from the two buttons when
"Network Reset..." appears on the display.
5
"Completed" is shown in the display when reset is
complete.
0 Before returning the settings to the default settings, use the "Save & Load" function
from the menu to save and restore the details of various settings configured on the
unit. (v p. 262)
NOTE
0 Do not turn the power off until reset is complete.
Remote
Tips
Appendix
Index
Advertisement
