Advertisement
Contents
Connections
Q4
N REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to operate this
unit and external devices from a different room. (v p. 95)
O Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.
"Connection 2 : TV equipped with an HDMI connector and
0
incompatible with the ARC (Audio Return Channel) / eARC
(Enhanced Audio Return Channel)" (v p. 82)
"Connection 3 : TV equipped without an HDMI
0
connector" (v p. 83)
"Connecting a set-top box (Satellite tuner/cable TV)" (v p. 86)
0
"Connecting a DVD player or Blu-ray Disc player" (v p. 87)
0
Front panel
Display
Playback
Q5 Q6
Q7
Q8
Rear panel
Settings
P BALANCED XLR PRE OUT connectors
Used to connect a power amp with BALANCED XLR input connectors.
(v p. 45)
Q DC OUT jacks
Used to connect devices equipped with the trigger function.
(v p. 96)
R RS-232C connector
Used to connect home automation controller devices fitted with
RS-232C connectors. Consult the owner's manual of the home
automation controller for more information about serial control of this
unit.
Perform the operation below beforehand.
A Turn on the power of this unit.
B Turn off the power of this unit from the external controller.
C Check that the unit is in the standby mode.
NOTE
0 Do not touch the inner pins of the connectors on the rear panel. Electrostatic
discharge may cause permanent damage to the unit.
30
Remote
Tips
Appendix
Index
Advertisement
