Table of Contents
Advertisement
AXIS C1410 Network Mini Speaker
Device setup
2. Set up a schedule:
2.1
Go to Events > Management > Schedules.
2.2
Create a schedule that starts at 18:00 and ends at 18:01 (every day). Name it "speaker test schedule".
3. Set up an automated speaker test:
3.1
Go to Events > Management > Action rules and click Add.
3.2
Enter a name and select Time from the trigger list.
3.3
Select Recurrence and select "speaker test recurrence".
3.4
Select "speaker test schedule".
3.5
Select Run speaker test as action type and click OK.
4. Create an email recipient:
4.1
Go to Events > Management > Recipients, and click Add.
4.2
Name it "speaker test recipients" and select Email from the Type list.
4.3
Enter the email addresses to send emails to in the To field. Use commas to separate multiple addresses.
4.4
Select the email provider from the Provider list.
4.5
Enter the user ID and password for the email account.
4.6
Click Test to send a test email.
Note
Some email providers have security filters that prevent users from receiving or viewing large attachments, from
receiving scheduled emails and similar. Check the email provider's security policy to avoid delivery problems and
locked email accounts.
5. Set up the condition of when to send the email:
5.1
Go to Events > Management > Action rules and click Add.
5.2
Enter a name and select Speaker test from the trigger list.
5.3
Select Test result and select Failed.
5.4
Select Send notification as action type and select "speaker test recipients" as recipient.
5.5
Enter a subject and a message and click OK.
Set up rules and alerts
You can create rules to make your device perform actions when certain events occur. A rule consists of conditions and actions. The
conditions can be used to trigger the actions. For example, the device can play an audio clip according to a schedule or when it
receives a call, or send an email if the device changes IP address.
10
Advertisement
Table of Contents
