Device Setup - Axis C1410 User Manual

AXIS C1410 Network Mini Speaker

Device setup

Device setup
This section describes the settings you can make on the device's webpage. Go to https://[IP address of your
device] to access the device's webpage.
Change the root password
1. Log in to the product's webpage and go to System > Users.
2. For the root user, click Edit.
3. Enter a new password and save.
Set up a new zone
1. Log in to the audio device that you want to set as the leader in the audio system.
2. Go to Audio > System settings.
3. Edit the leader audio device:
3.1 Click the pencil.
3.2 Enter audio device name and enter username and password.
3.3 Click Apply
4. If possible, change to Multicast.
5. Add audio devices to the audio system:
5.1 Under Available audio devices, click the plus sign to add an audio device to the zone. If your device is not
listed, click Add device manually to add the device.
5.2 For each audio device, set the audio device name and enter username and password for that device.
5.3 Click Apply.
Set volume and gain
Volume
1. Go to Audio > System overview.
2. Use the slider System under Volume to set the system volume.
Gain
1. Go to Audio > Device settings.
2. On the Output, set the Output gain.
3. On the Input tab, set the Input gain.
4. Go to Audio > System overview.
5. Use the sliders beside a follower to adjust the gain for an audio device.
6